6 Functions and settings
Maschinenfabrik Reinhausen GmbH 2016
171
5163667/00 EN
TRAFOGUARD® ISM®
Baud rate (only with serial transmission type)
You can use this parameter to set the serial interface's baud rate. You can
select the following options:
▪
9600 baud
▪
19200 baud
▪
38400 baud
▪
57600 baud
▪
115200 baud
To set the baud rate, proceed as follows:
1.
Go to
Settings > Parameters > DNP3 > Baud rate
.
2.
Select baud rate.
3.
Press the
Accept
button to save the modified parameter.
Device address
You can use this parameter to set the device's link address. To set the de-
vice address, proceed as follows:
1.
Go to
Settings > Parameters > DNP3 > Device address
.
2.
Enter device address.
3.
Press the
Accept
button to save the modified parameter
Destination address
You can use this parameter to set the link address of the destination master.
To set the destination address, proceed as follows:
1.
Go to
Settings > Parameters > DNP3 > Destination address
.
2.
Enter destination address.
3.
Press the
Accept
button to save the modified parameter
Unsolicited report mode
You can use this parameter to set whether the device is to support unsolicit-
ed messages. If you activate unsolicited messages, the device sends a mes-
sage via the control system each time a value is changed.
To set support for unsolicited messages, proceed as follows:
1.
Go to
Settings > Parameters > DNP3 > Unsolicited messages
.
2.
Select the option you want.
3.
Press the
Accept
button to save the modified parameter.
Repetition of unsolicited messages
You can use this parameter to set how often the device is to send an unsoli-
cited message until it receives a response from the DNP3 master.
Summary of Contents for TRAFOGUARD ISM
Page 1: ...Monitoring System TRAFOGUARD ISM Operating Instructions 5163667 00 EN ...
Page 222: ......
Page 223: ......
