manualshive.com logo in svg

Motorola F4707A, User Manual

Share
Download
Motorola F4707A User Manual Download Page 152

129

4 and 8 Bay Charging/Communication Cradles

Combined CHARGE and COMM LED Indications

Table 11 describes the combined CHARGE and COMM LED Indications 

Mounting the Cradle

The cradle should be mounted on flat surface such as a desktop or a cabinet shelf.

Read the following safety guidelines before mounting the cradle: 

•

Do not expose the cradle or power supply unit to water, rain, or snow

•

Before using battery or cradle, read all the instructions for and cautionary markings on the battery, 
the cradle, power supply unit, and the HC700-G

•

To reduce the risk of damage to the cord or plug, pull by the plug rather than the cord when you 
disconnect the cradle from the power source outlet

•

Do not operate the cradle with a damaged cord or plug replace them immediately 

•

The cradle and HC700-G may become warm during operation, but not hot. If it becomes hot to the 
touch, unplug the power supply of the cradle from the power outlet immediately and discontinue its 
use

•

Use of a non-recommended attachment to the cradle may result in a risk of fire, electric shock, or 
injury to persons. 

•

Make sure all cords and cables are located so that it will not be stepped on, tripped over, or 
subjected to damage or stress. 

•

Make sure all cords and cables are located so that it will not be stepped on, tripped over, or 
subjected to damage or stress. An extension cord should not be used with any power supply unit 

TABLE 11. 

Charging/Communication cradles - Combined CHARGE and COMM LED Indications

LED Status

Description

Both, the CHARGE and 
COMM LEDs flash orange.

The cradle is in a software update process. The LEDs will stop 
flashing once the software update process is completed.

Every 30 seconds, all green 
COMM LEDs and all amber 
CHARGE LEDs light steady 
for 10 seconds and then return 
to their pervious state.

The Primary image (operating system) of the cradle is damaged 
and the cradle is working on the a back-up image. Contact 
service for downloading new image to the cradle.

Summary of Contents for F4707A

































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands