Motion Concepts ULTRA-LOW MAXX UPFRONT MPPS, Owner'S Manual

Page: 85 / 100

- 85 -
minimum
5” (13cm)
Home Position Recline Interference
Full Recline
Home Position
WARNING! Risk of System Damage During Recline/ESR. I mproper installation of your headrest
hardware may result in collision interference between the headrest post and the recline pushbar
and/or remote attendant control
• Maintain a minimum of 5” (13cm) clearance between the bottom of the upper headrest post and the
protector plate on the recline pushbar.
• Re-adjust the headrest pivots/linkages to compensate for the increased headrest post height.
• Following any headrest adjustments, ALWAYS test for collision interference over the full range of Recline/
ESR. Make further adjustments as necessary.

Recline
Interference
Insufficient Clearance
X

X
IMPROPER SET-UP
PROPER SET-UP
A.
Multi-Axis Headrest Hardware (MAHW):
5.15.5 HEADREST HARDWARE SET-UP: FOR RECLINE & ESR SYSTEMS
minimum
5” (13cm)
Home Position Recline Interference Full Recline Home Position

Recline
Interference
Insufficient Clearance
X
Re-adjust
Pivots

X
IMPROPER SET-UP
PROPER SET-UP
B.
Matrx Elan Headrest Hardware (MEHW / MEMH):
Re-adjust
Pivots
5.0
5.0
SEATING ACCESSORIES & COMFORT ADJUSTMENTS
SEATING ACCESSORIES & COMFORT ADJUSTMENTS