5.9.1 CENTER MOUNT LEGREST HANGER ASSEMBLY (FOR SYNCHRONIZED LEG)
WARNING! Your CM Legrest Hanger Assembly (Fig 1.0) has been set-up/adjusted to ensure the
synchronized legrest operates properly during the Elevate/Reach and/or Anterior-Tilt function.
Modifications to the original mounting set-up may result in serious damage to the seating system.
•
DO NOT adjust the mounting position (legrest depth) of the CM legrest hangers or the synchronized
leg actuator (mounting bracket), otherwise damage may occur.
•
The Hanger Crank Bracket (and CM Cross Tube) must ALWAYS be aligned/installed using the mounting
hole position indicated below- see
Fig 1.0
(
A
); (Note: This mounting configuration locates the CM
legrest at the perpendicular (90°) position).
•
CM Legrest depth adjustments are made using the Ultra-Rails, and should ONLY be performed by a
Qualified Service Technician (refer to
section 5.7.1
, Seat Depth (Ultra-Rail) Adjustments).
Center Mount Legrest Hanger Assembly
(for Synchronized Legrest)
Hanger Crank Bracket
Sync Leg Actuator
Cross Tube
(CM Legrest Not Shown)
CM Legrest Hanger
Actuator Mounting Bracket
Hanger Crank
mounting hole
Fig 1.0
NOTE:
The CM Legrest Hanger Assembly may be configured to have the synchronized legrest actuator,
and hanger crank bracket, mounted on the left
or
right side of the seating system. The default mounting
position is on the left Ultra-Rail as illustated in
Fig 1.0
and
2.0
below.
A
A
A
Ultra-Rail
Seat Pan
Fig 2.0
5.0
5.0
SEATING ACCESSORIES & COMFORT ADJUSTMENTS
SEATING ACCESSORIES & COMFORT ADJUSTMENTS
- 67 -
Summary of Contents for ULTRA-LOW MAXX UPFRONT MPPS
Page 99: ......
