- 45 -
4.3.3 MAXIMUM TILT (TILT/RECLINE) LIMIT
CAUTION! Risk of Damage
When establishing the max tilt limit, always consider the size and location of any personal gear that may
be carried on the wheelchair, as it could cause interference between the backrest and the wheelchair
base when fully tilted/reclined, and damage the actuator and/or wheelchair.
WARNING! Risk of compromised wheelchair stability and serious personal injury.
•
Always
ensure the wheelchair is on a smooth level surface when driving in an elevated/reach and/or
tilted and/or reclined position (even at reduced speed).
•
Never
drive up or down an incline while elevated, tilted or reclined.
•
Never
reach for items/objects, or shift body position (in any direction) while in an elevated position.
•
Never
transfer in or out of your wheelchair while elevated.
Tilt-Only (UL Maxx Upfront (45PAT Reach Module):
Max. Tilt Limit = 45°
Tilt/Recline* (UL Maxx Upfront (45PAT Reach Module):
Max. Tilt/Recline Limit = 168°
(at home position)
4.0
4.0
ELECTRONICS
ELECTRONICS
The
Max. Tilt
or
Tilt/Recline Limit
sets the maximum back angle for the seating system at full Tilt or Recline or
Tilt/Recline combined. This limit prevents the back angle from extending beyond the maximum allowable angle.
Motion Concepts seating systems are typically preset at the factory to the maximum safe angle and do not re-
quire any further adjustment unless the maximum angle needs to be decreased.
Max. combined tilt/recline angle (at home position)
168°
Max. Tilt/Recline Limit
45°
Max. Tilt Limit
IMPORTANT!
The full range of Tilt and Recline is only available when the Rovi-Upfront MPPS is in the
HOME position.
*NOTE:
The Tilt function is locked out (does not function) when the Upfront MPPS is in an Elevated/Reach position;
the Max Recline Angle is restricted to a
maximum 48°
when the Upfront MPPS is in the Elevated/Reach position.
4.3.2 ELEVATE/REACH REDUCED DRIVE SPEED (RDS) LIMIT
(...cont’d)
Summary of Contents for ULTRA-LOW MAXX UPFRONT MPPS
Page 99: ......