POWER RECLINE INSTRUCTIONS:
(
Note:
Recline typically operates in
TOGGLE
mode thru the 8-way Switch).
1. Press forward on the RECLINE switch (
1
) to recline the seat
backward.
2. Release the switch
(pause for 1-2 seconds until you hear a ‘click’),
then press forward again on the RECLINE switch (
1
) to recline forward
(back to an upright position).
1
3.5.3
POWER RECLINE FUNCTION
(OPTIONAL)
- THRU SWITCH
1. Press downward on the Legrest (LEGS) switch (
1
) to extend
the legrests outward
.
2. Release the switch
(pause for 1-2 seconds until you hear a ‘click’)
then press downward again on the legrest (LEGS) switch (
1)
to retract
the legrests inward.
POWER LEGREST INSTRUCTIONS:
(
Note:
Power Legs typically operates in
TOGGLE
mode thru the 8-way Switch).
3.5.4
POWER LEGREST FUNCTION - THRU SWITCH
1
POWER TILT INSTRUCTIONS:
(
Note:
the Tilt Function operates in
DIRECT
mode thru the 8-way Switch).
1. Press backward on the TILT switch (
1
) to tilt the seat backward
.
2. Press forward on the TILT switch (
2
) to tilt the seat forward.
3.5.2
POWER TILT FUNCTION - THRU SWITCH
1
2
WARNING! Risk of serious injury or damage
• ALWAYS maintain a minimum of
3 inches
between bottom of the front riggings and the floor/ground
while the wheelchair is in motion to ensure proper ground clearance. If necessary, elevate the front
rigging or tilt seat to achieve proper ground clearance.
• DO NOT leave elevating legrests in the fully extended position when proceeding down ramps or slopes.
- 37 -
3.0 PROGRAMMING
3.0 PROGRAMMING
AND
AND
OPERATING
OPERATING
YOUR
YOUR
ROVI-UPFRONT MPPS
ROVI-UPFRONT MPPS
Summary of Contents for ULTRA-LOW MAXX UPFRONT MPPS
Page 99: ......
