A. R
EMOTE
A
TTENDANT
C
ONTROL
: F
EATURE
O
VERVIEW
w
Attendant Controls
- the Remote operates as an attendant control (and LED display) utilizing the touch
switches to scroll through and operate the seat functions on the power positioning system
(refer to Section 3.6-
Operating Your Rovi Reach PPS Thru the Attendant Control)
.
w
Motor Speed Control
- The remote allows the individual actuator speeds to be adjusted/set independently
for both Forward and Reverse directions
(see
B.
below)
.
w
Configuring Switches & Joystick Functions
1
- The installed operator switches and/or joystick (ASM)
can be reconfigured to operate the available motor functions in either toggle or direct mode.
w
Setting Limits & Lockout Angles
1
-
The remote operates as a hand-held programmer for the Tipsy
Sensor to set the necessary safety limits and lockouts on the power positioning system (see
Section 4.3
)
w
LED Indicator Light
- an external LED light on the remote attendant control serves as a visual indicator to
the position/ status of the seating system with respect to safety limits and lockouts:
Green Light
= indicates that seating system is in the Home position;
Flashing Green
= indicates that seating system is Out of Home;
Flashing Red
= indicates that a Tilt/Recline and/or Elevating system is in Reduced Drive Speed (RDS);
Red Light
= indicates the seating system is in Drive Lockout (DLO).
1
Note:
Programming options for the Remote are password protected and only accessible to Qualified Technical
Service personnel. If you require programming changes beyond your existing set-up, please contact your
authorized Dealer or Service Provider for assistance.
4.1.2 REMOTE ATTENDANT CONTROL:
(
...cont’d)
4.0
4.0
ELECTRONICS
ELECTRONICS
B. A
TTENDANT
C
ONTROL
- A
DJUSTING THE
M
OTOR
S
PEED
1. Select the motor function and direction you wish to adjust.
2. To decrease the motor speed, press the SPEED DOWN button (left) while
simultaneously
pressing the motor function/direction button (
1
).
3. To increase the motor speed, press the SPEED UP button (right) while
simultaneously
pressing the motor function/direction button (
2
).
Speed Up
Speed Down
‘Motor’
‘Direction’
TILT
93
TILT
88
TILT
BACKWARD
Decrease
Motor Speed
Increase
Motor Speed
e.g.
Adjusting ‘Tilt Backward’ speed
1
2
NOTE:
Motor speeds may be adjusted independently while in standard mode. The ‘
Exit/Back
’ and
‘
Select/Save
’ buttons function as ‘
SPEED DOWN
’ and ‘
SPEED UP
’ while operating a motor function.
Select/Save Button
Exit/Back Button
LED Indicator
Screen
Display
TOP
Left/Right
(STD Mode):
w
Selects Seat/Motor Function
Up/Down
(STD Mode):
w
Operates Motor Function
- 42 -
Summary of Contents for ULTRA-LOW MAXX UPFRONT MPPS
Page 99: ......
