MEHW and MEMH
Installation/Adjustment Instructions:
(...cont’d)
5. Adjust the headrest position (depth/angle), as necessary, by loosening the three pivot/linkage adjustment
screws
1
(see
Fig. 2.
). Once the final headrest position is established, fully tighten all adjustment screws.
6. Secure the Lower D-Ring onto the vertical post so that it rest flush with the bottom of the clamp assembly (to
prevent slipping)
2
.
1
NOTE:
If installing the optional
Lever Handles
, carefully remove the adjustment screws from the upper and/or
lower pivot, then thread the lever handle into the hex insert
(see
Fig. 3.
).
2
NOTE:
If necessary, the vertical headrest post can be modified (cut*) in order to prevent any collision interference
along the back of the seating system. (*After cutting the post, the plastic end cap in the bottom of the post
can be removed and re-installed into the newly cut post).
(see
Fig. 1C
.)
Fig 3.
E
LAN
L
INKAGE
A
DJUSTMENT
S
CREWS
lower
adjustment screw
upper
adjustment screw
middle
adjustment screw
Fig. 2.
(O
PTIONAL
)
L
EVER
H
ANDLE
I
NSTALLATION
IMPORTANT!
Install lever handles
ONLY where indicated)
5.0
5.0
SEATING ACCESSORIES & COMFORT ADJUSTMENTS
SEATING ACCESSORIES & COMFORT ADJUSTMENTS
- 84 -
Summary of Contents for ULTRA-LOW MAXX UPFRONT MPPS
Page 99: ......
