2b
3
4
2a
1
ELEVATE (REACH) INSTRUCTIONS:
(
Note:
the Elevate/Reach Function operates in
DIRECT
mode thru the joystick).
1. Press the Mode Button (
1
) on the remote joystick to put the wheelchair in
power seating mode.
2. Press the joystick control to the left or right (
2a
), to scroll through all
the available power positioning options, until the ELEVATE function is
highlighted in the joystick display (
2b
).
3. To raise the seating system (to an elevated or ‘reach’ position),
pull back
on the joystick control (
3
). Hold the joystick control until you reach the
desired position/height
*
; Release the joystick control to stop.
4. To lower the seating system,
push forward
on the joystick control (
4
).
Hold the joystick control until you reach the desired position/height; Release
the joystick control to stop.
3.4.5
ELEVATE/REACH FUNCTION - THRU JOYSTICK
3.4.4
POWER LEGREST FUNCTION - THRU JOYSTICK
2b
1
POWER LEGREST INSTRUCTIONS:
(
Note:
the Legrest Function operates in
DIRECT
mode thru the joystick).
1. Press the Mode Button (
1
) on the remote joystick to put the wheelchair in
power seating mode.
2. Press the joystick control to the left or right (
2a
), to scroll through all
the available power positioning options, until the LEGS function is highlighted
in the joystick display (
2b
).
3. To extend the legrest outward,
pull back
on the joystick control (
3
). Hold
the joystick control until you reach the desired position; Release the joystick
control to stop.
4. To bring the legrest inward,
push forward
on the joystick control (
4
). Hold
the joystick control until you reach the desired legrest position; Release
the joystick control to stop.
3
4
2a
- 33 -
WARNING! Risk of serious injury or damage
• ALWAYS maintain a minimum of
3 inches
between bottom of the front riggings and the floor/ground
while the wheelchair is in motion to ensure proper ground clearance. If necessary, elevate the front
rigging or tilt seat to achieve proper ground clearance.
• DO NOT leave elevating legrests in the fully extended position when proceeding down ramps or slopes.
3.0 PROGRAMMING
3.0 PROGRAMMING
AND
AND
OPERATING
OPERATING
YOUR
YOUR
ROVI-UPFRONT MPPS
ROVI-UPFRONT MPPS
Summary of Contents for ULTRA-LOW MAXX UPFRONT MPPS
Page 99: ......
