1.2 Intended
Use
Our modular power positioning system is appropriate for use by any individual who drives a power wheelchair
and who desires or requires a change of position without having to utilize the services of an attendant. Needs
for position changes include:
- All positioning benefits associated with the tilt/recline product:
Comfort
— as with any individual – able-bodied or disabled – changes in position are necessary to
maintain a state of comfort.
Positioning
— Individuals without adequate upper-body stability can be tilted to allow gravity to old
them in position.
Pressure Relief or Reduction
— Individuals who wish, from time to time, to redistribute pressure
from one area of the body to another, can do so by tilting and/or reclining. By changing the individual’s
orientation in space, pressures caused by gravity will shift.
- Positioning/Versatility
– individuals are able to reach higher elevations in a seated position, increasing
their range of motion and accessibility.
Please be certain to review all safety warnings provided in
Section 2.0
-
Safety Information
. Please also read
all safety information and manuals provided (separately) with your wheelchair and wheelchair accessories,
including but not limited to the
Power Wheelchair Base Owner/Operators Manual.
1.3 Limited
Warranty
Disclaimer
Motion Concepts makes no claims as to the therapeutic effectiveness of the products. Our only claims relate
to the ability of the products to provide safe and reliable powered repositioning on the equipment onto which
they are installed.
Limited Warranty
All structural components manufactured by Motion Concepts are warranted to be free from defects in materials
and workmanship for the lifetime of the original owner. Actuators and electronic components are warranted to
be free from defects in material and workmanship for a period of two years. If during the warranty period, any
component is determined, at the sole discretion of Motion Concepts, to be defective, such component will be
repaired or replaced at the option of Motion Concepts.
The sole obligation of Motion Concepts under this warranty shall be to repair or replace any component or
components which are found to be defective. For warranty service, contact the dealer from which the system
was purchased. The purchaser of the product is responsible for returning the product to the dealer. Any
defective component, once replaced under warranty, shall become the property of Motion Concepts. If
further service is required, please contact Motion Concepts: Canada 866-748-7943; USA 888-433-6818
Limitations and Exclusions
The foregoing warranty shall apply only to the original purchase and shall not apply to product subjected to
neglect, abuse, improper operation, accidental damage or improper storage. The warranty shall not apply
to products which have been modified or fitted with improper parts or components without the written consent
of Motion Concepts. The warranty shall also not apply to a product which has been damaged as a result of
unauthorized repairs and/or by circumstances not under the control of Motion Concepts.
The foregoing is exclusive and in lieu of all other warranties, expressed or implied, including, without limitation,
implied warranties of merchantability and fitness for a particular purpose. The warranty shall not be extended
beyond the duration of the expressed warranty provided herein. Motion Concepts shall not be liable for
any consequential or incidental damages whatsoever.
Some jurisdictions do not allow the exclusions or limitation of incidental or consequential damages, or limitation
on the length of an implied warranty. Local laws should be reviewed to determine if the above exclusions and
limitations apply.
- 6 -
Summary of Contents for ULTRA-LOW MAXX UPFRONT MPPS
Page 99: ......
