- 89 -
IMPORTANT!
To ensure the optimal safety and reliability of your power positioning system, please adhere
to the
Maintenance Checklist
provided in
Section 7.2
. In addition to the Checklist provided, please
review the daily maintenance recommendations and additional safety warnings provided below to
ensure your power positioning system is operating safely and efficiently.
7.0 GENERAL SET-UP AND MAINTENANCE
7.0 GENERAL SET-UP AND MAINTENANCE
IMPORTANT!
Motion Concepts disclaims all responsibility and liability for any personal injury
or damage to property that occurs as a result of improper or insufficient maintenance, and/or
any unauthorized Dealer or unqualified third-party repairs or modifications made to the power
positioning system or the wheelchair on which the system is installed.
IMPORTANT Information about Maintenance Work Tools/Equipment!
Some basic/periodic maintenance tasks identified in this manual can be carried out by the user without
problems, but do require the correct tools. If you do not have the proper tool(s) available, or if you
are not comfortable performing the maintenance task, we strongly recommend that you contact you
local Service Provider to arrange for assistance.
DELIVERY INSPECTION:
• A full inspection should be performed by the Service Provider at the time of delivery/set-up.
• Initial adjustments should be made to safely meet your body structure, personal needs and preferences.
Thereafter, monthly and periodic inspections should be performed by the end user/attendant between semi-
annual (6 month) service inspection
DAILY MAINTENANCE:
• Check that the joystick and/or switches (push buttons/toggles) that operate your power positioning system
are functioning properly
• Charge your batteries.
(Refer to the battery charging information provided (
section 7.5
), as well as your
Power Base Owners Manual for important information on battery charging and proper battery care).
SEMI-ANNUAL SERVICE INSPECTION:
• To ensure your power positioning system is operating properly and safely, Motion Concepts recommends
a complete system inspection be performed
every six (6) months
by a Qualified Service Technician. Contact
your local Service Provider to schedule an inspection.
MAINTENANCE INFORMATION AND SAFETY WARNINGS!
IMPORTANT!
Please be certain to also read and follow all maintenance and safety information provided
separately in your
Base Manufacturer’s Owner/Operators Manual
.
DANGER! Risk of Injury, Damage or Death
Improper set-up, service, adjustment or programming may result in injury, damage or death.
• A Qualified Technician MUST set-up, service and program the wheelchair/power positioning system.
• DO NOT allow non-qualified technicians to perform any service repairs, modifications or adjustments on
your wheelchair/power positioning sysrtem.
• Turn off power BEFORE adjusting or servicing the wheelchair/power positioning system.
• Ensure that all hardware is securely tightened after set-up, or following any maintenance or adjustments.
IMPORTANT!
Regular cleaning will reveal loose or worn parts and enhance the smooth operation of your
power positioning system/wheelchair. To operate safely and properly, your wheelchair seating system
must be cared for just like any other vehicle. Routine maintenance will extend the life and efficiency of
your wheelchair.
7.1 Maintenance and Inspection Schedule
Summary of Contents for ULTRA-LOW MAXX UPFRONT MPPS
Page 99: ......
