- 92 -
IMPORTANT!
To maintain the smooth operation of your Power Positioning System, periodical lubrication
of the main pivot points is recommended. Motion Concepts Seating Systems are pre-lubricated at the
factory, however occasional lubrication using a general purpose oil will help to maintain optimal performance
of your seating system. Avoid the use of heavy grease or high viscosity lubricants as this can cause a
build-up of dirt and contaminates which could reduce overall performance.
*Warning!
Turn power off to the wheelchair
prior to cleaning and lubricating
actuator
rod-end
7.0 GENERAL SET-UP AND MAINTENANCE
7.0 GENERAL SET-UP AND MAINTENANCE
Pivot Point Lubrication
-Tilt/Elevate the seating system
*
;
-Use a clean rag to wipe away any dirt, residue around
pivots and along slide channels;
-Lubricate main pivot points of the positioning module
periodically using a general purpose oil.
CAUTION! Risk of Damage
• Spraying your power positioning system with water or any type of liquid may permanently damage
the electronics. Never spray the seating system with any type of water or liquid.
• Cleaning solvents containing alcohols or phenols may cause damage to upholstery and plastic surfaces,
and should be avoided.
IMPORTANT!
For detailed information on cleaning your power wheelchair, please also be certain to
read and follow the instructions/warnings provided (separately) in your wheelchair base Owners Manual
.
Cleaning Upholstery, Cloth, Vinyl:
Lukewarm water and a mild non-abrasive soap may be used to clean the upholstery as needed. For add-on
devices (i.e. seat and back cushions, etc..) refer to the specific laundering instructions in the user manual provided
with the device.
Contact the device manufacture directly for cleaning protocols related to severely stained/
contaminated cushions and upholstery.
Cleaning Metal Surfaces:
Hot water and a mild detergent on a soft cloth should be used for cleaning metal surfaces. Wipe down with a
damp cloth. Dry surface by wiping surface with a dry cloth.
Cleaning Plastic Surfaces:
Hot water and a mild detergent on a soft cloth should be used for cleaning plastic surfaces. Wipe down with
a damp cloth. Dry surface by wiping surface with a dry cloth.
IMPORTANT!
Regular cleaning will reveal loose or worn parts and can enhance the smooth operation
of you power positioning system.
7.3 Seating Module Lubrication
7.4 Cleaning Your Power Positioning System
Summary of Contents for ULTRA-LOW MAXX UPFRONT MPPS
Page 99: ......