- 78 -
5.13.1 MAXX QUICK-RELEASE LATERAL HIP SUPPORT
Standard
Height
Reduced
Height
2 Pad Height Positions
(via mounting slots)
Loosen screws
(x2)
and rotate knuckle
joints to adjust the pad width/angle
Width/ Angle Adjustment
Pad Height Adjustments
Standard
Offset
Wide
Offset
Loosen screws
(x2)
and adjust hip
pad to desired depth
(via slot)
Pad Depth Adjustment
Fore and Aft Depth Adjustment
(via extruded side rail)
Loosen adjustment screw
(do not remove)
and adjust the hip support via the ultra-rail
Note
: Pad sizes may vary from shown
5.0
5.0
SEATING ACCESSORIES & COMFORT ADJUSTMENTS
SEATING ACCESSORIES & COMFORT ADJUSTMENTS
WARNING! Risk of serious injury or damage.
•
When performing transfer activities into and out of the wheelchair, DO NOT use the Hip Pads for
load bearing support. To prevent the risk of injury and/or damage to the hip pads, transfers should be
performed using designated transfer handles, and in the presence of an attendant whenever possible.
5.13 Lateral Hip Support Adjustments
Lift handle to unlock hip support
Hip Support Lock/Release
Summary of Contents for ULTRA-LOW MAXX UPFRONT MPPS
Page 99: ......