Entering Valet Mode with Key Fob:
1. Open entry door.
2. Press the lock button.
3. Press the unlock button.
4. Press the lock button again.
5. Ensure the red LED is a steady glow.
Entering Valet Mode with Valet/Program Button:
1. Turn the ignition ON.
2. Turn the ignition OFF.
3. Press and hold the Valet/Program button ten seconds and release.
4. Ensure the red LED is a steady glow.
Multi-Level Security Arming
This feature applies to one arming cycle only. The selection of which sensor
inputs are active and which are bypassed can be set when arming. Press the lock
button within five seconds after arming. Each time the lock button is pressed
another zone or zones are bypassed. Reset the system to monitor all zones by
turning the ignition key on.
Table of Zones:
• Zone One is the pin switches.
• Zone Two is the Warn away.
• Zone Three is the Entry Door.
• Zone Four is the Bay Doors.
• Zone Five is the Ignition.
Quick Reference Guide:
• Lock - Arms or activates the system.
• Unlock - Disarms the system.
• Lock - While driving will arm the system.
• Ignition ON and the Valet button pressed will disarm without a
transmitter.
• Ignition ON, then OFF, then pressing the Valet button for ten sec-
onds enters or exits the Valet Mode.
• Press and hold the HORN button for one second to enter the
Panic Mode.
• Press the HORN button to exit the Panic Mode.
• Press the AUX button for Silent Mode Activation.
Tips:
• Remember the location of the Valet/Program button.
• Know the number of Valet/Program button pulses for disarming.
• There is a 24 hour support number located on the back of the key
fob.
• The headlights will only flash when using the Key Fob.
Driving & Safety
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
S I G N A T U R E S E R I E S
2 • 6 3
Summary of Contents for SIGNATURE 2001 series
