Monaco SIGNATURE 2001 series, Owner'S Manual

Page: 144 / 327

Equipment
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
S I G N A T U R E
5 • 1 4 4
The sofa will convert easily into a bed. The sofa comes equipped with
safety belts and these should be used if occupied during travel.
Sofa to Sleeper:
• Raise the sofa seat base until seat base and backrest form a V
shape by lifting up from the center of sofa just below the seat
cushions.
• Push down on seat base until the seat base and backrest are flat.
• Fold seat belts out of the way.
Sleeper to Sofa:
• Lift the seat base up until seat and back rest are in a V shape.
• Push down on seat base.
• The booth dinette easily converts into a bed.
• Lift seat cushions to an angled vertical position.
• With a firm grip, lift front edge of the table approximately six
inches and push table leg lock to side.
• Swing the table leg up and lock into a horizontal position.
• Continue lifting table until table stays are clear of retainers. Pull
outward and lower table down.
• Use both seat cushions and one back cushion for a mattress. Leave
one back cushion in a vertical position.
WARNING: Do not occupy the booth dinette or dining
chairs while vehicle is in motion. They are not equipped
with occupant restraint systems. Chairs must be stored in an enclosed
area or secured with tie down straps prior to setting the motorhome
into motion to avoid the risk of personal injury to motorhome occu-
pants resulting from a crash or sudden stop.
To use the storage compartment located under the bed, locate and unlock
the bed deck latches. Lift up the bed by the front edge of the mattress plat-
form. Gas struts hold the mattress and platform open. To access the engine
compartment, press down on the button in each latch, open the engine hatch and
secure the latch with the hook provided.
NOTE: Do not over stress gas struts by rapidly opening or closing the
bed access cover, as this action can damage the struts or mounts. In
extreme cold gas struts may not hold the mattress platform in the
open position.
SOFA BED
CONVERSION
DINETTE BED
CONVERSION
(Optional)
STORAGE
- UNDER BED &
ENGINE ACCESS