NOTE: Information entered into the navigation system should
only be done when the motorhome is at a safe stop point.
Attempting to operate the system while driving can distract your
attention from the road and possibly cause an accident. It is more
important to keep your eyes on the road and your hands on the
wheel.
Keeping Updated:
The highways are changing constantly. A 100% correspondence of the
digital map cannot be achieved in all circumstances. Contact Navigation
Technologies 1- (888) NAV-MAPS for additional maps, new maps or for
difficulties with a current map.
Consult the owners manual in your information box for more
detailed information.
When the ignition is switched ON the compass displays the
forward direction of travel and the ambient temperature. When
the ignition is OFF the compass remains in sleep mode. The
compass may be temporarily awakened by pressing the Mode
button for three seconds. Pressing the F/C button will toggle
the temperature indication between Fahrenheit and Celsius.
The compass is calibrated at the factory. To retain direction-
al accuracy of the compass 22 zones are used. To change the
zone setting or calibrate the compass, press the Mode button
for 12-15 seconds. The words Zone and Cal will appear in the
screen.
• Press the F/C button to change zones. The compass
does not require calibration when selecting a new
zone. Press the Mode button twice to escape the cal-
ibration time period.
• Press the Mode button to enter the 60 calibration
time period. Slowly complete a 360º turn of the
motorhome to orient the compass. After the 60 sec-
ond calibration period the compass will return to a
normal display. If the word Cal is flashing the com-
pass is not calibrated and the calibration process will
have to be repeated.
NOTE: When selecting a new zone refer to the owner information file
to obtain the correct zone for the current location.
NOTE: The compass is powered from the chassis battery. The compass
should not require calibration when the main battery disconnect switch
is turned off.
Electrical Systems - Chassis
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
S I G N A T U R E
9 • 2 5 4
Compass
F/C
MODE
Summary of Contents for SIGNATURE 2001 series
