Monaco SIGNATURE 2001 series, Owner'S Manual

Page: 149 / 327

NOTE: The TV located in the bay receives the same input signal as the
front TV.
These same pushbuttons are located in the
REMOTE TV VIEWING
section. These are for use with the Bedroom television.
The section labeled VCR RECORDING is used to select the program source
which will be recorded with the VCR.
•
ANT
is the
Roof Television Antenna
which uses the VCR tuner for
channel selection.
•
AUX 1
is the
SATELLITE RECEIVER
(Optional).
•
AUX 2
is the
DVD
. DVD discs are protected under copyright laws and
cannot be taped.
•
CABLE
is the
Shore Cable
coax feed which uses the VCR tuner for
channel selection.
The plasma TV is a monitor only. A separate tuner with remote control is used
to select the channels. When the TV is switched ON, it will automatically raise to
the view position. When the TV is switched OFF, the TV will lower to the
stowed position.
The plasma TV uses the Bose home theater as the sound system. The separate
tuner supplies a volume signal to the Bose home theater system. If the audio
amplification is inadequate, increase the volume on the separate tuner.
NOTE: The tuner remote requires that the workstation door be open
to operate properly.
NOTE: The plasma TV may receive either an RF signal from the DVD
by pressing the AUX-2 button on the video selector box or S-video sig-
nal by using the Y/C button on the Sony remote.
CAUTION: Be sure all persons, pets and objects are clear before acti-
vating the plasma TV.
Equipment
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
S I G N A T U R E
5 • 1 4 9
Plasma TV (Optional)