Chapter Four: Operation in Normal Mode
How To Switch Channels in the Main Display
105
LEFT DISPLAY
CENTER DISPLAY
RIGHT DISPLAY
The pressure reading
from the gauge on
channel 1 is shown here.
The pressure reading
from the gauge on
channel 2 is shown here.
The pressure reading
from the gauge on
channel 3 is shown here.
Torr
mTorr
HOLD
1 4
mTORR
MAIN DISPLAY
The pressure reading from one of the two gauges (discontinuous/
continuous operation), or a combined reading from both gauges
(only possible with continuous operation), is shown here.
Note: In this example,
the gauges on channels
1 and 4 make up the dual
channel display.
Figure 27: Dual Channel Display in Normal Mode
In a dual channel display, pressure information is shown for a single channel, or for both
channels combined. The display is determined by whether the dual channel feature is
configured for continuous or discontinuous operation, and whether the pressure is being
taken from the upper or lower channel, or the overlapping region between the channels.
Refer to How To Set Up a Dual Channel Readout, in the Operation in Setup Mode
chapter, to learn how to select continuous or discontinuous operation in the dual channel
display feature.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
