Chapter Four: Operation in Normal Mode
How To Display the Software Version
103
How To Display the Software Version
1. Repeatedly press the [
DISPLAY MODE
] key until the 146 unit is in Normal Mode.
The system responds by scrolling through modes.
2. Press the [9/C][0/D] keys simultaneously.
The system responds by displaying the software version number in the main display
(refer to Figure 26).
Torr
mTorr
Torr
HOLD
4
LEFT DISPLAY
CENTER DISPLAY
RIGHT DISPLAY
MAIN DISPLAY
The pressure reading
from the gauge on
channel 1 is shown here.
The pressure reading
from the gauge on
channel 2 is shown here.
The pressure reading
from the gauge on
channel 3 is shown here.
Software version number
is shown here.
Figure 26: Software Version Number in Normal Mode
3. Press the [
QUIET
/
CANCEL
] key.
The system responds by returning to the previous Normal Mode display.
Note
Any key can be pressed to return the window to Normal Mode.
However, the 146 unit also executes any command associated with the
key.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
