Chapter Three: Overview
Operational Diagram
83
Example 2:
SELECT A MODE
Starting at the center of the diagram, the 146 unit defaults to Normal Mode. Use the
[
DISPLAY MODE
] key to scroll to Tuning Mode.
PROCEED TO A BLUE COLORED WEDGE
There are two blue colored wedges touching the Tuning Mode wedge. Choose the one
that reads To edit recipes:. Contained in this blue wedge are instructions. When you
complete the instructions you may move on to the next new colored wedge.
PROCEED TO A RED COLORED WEDGE
There is only one red colored wedge into which you may move. The wedge contains
general information.
PROCEED TO A GREEN COLORED WEDGE
There are three green colored wedges touching the red wedge you are in. You may
perform any of the functions described in those wedges. For example, one function
listed is Adjust Set Point. To accomplish this, follow the directions inside the function’s
green colored wedge.
Example 3:
SELECT A MODE
Starting at the center of the diagram, the 146 unit defaults to Normal Mode. Use the
[
DISPLAY MODE
] key to scroll to Tuning Mode (the same mode as in example 2).
PROCEED TO A BLUE COLORED WEDGE
There are two blue colored wedges touching the Tuning Mode wedge. This time, choose the
one that reads To adjust parameters:. Contained in this blue wedge are instructions.
When you complete the instructions you may move on to the next new colored wedge.
PROCEED TO A RED COLORED WEDGE
There are 6 red colored wedges touching the blue wedge you are in. One of these wedges is
the same red wedge we moved into in example 2. This means that there are two avenues
that you may follow to reach the same three functions (Adjust Set Point, Gain, and
Lead). In this example, however, choose the red wedge which contains the function
Adjust Start. Follow the instructions written in this red wedge to adjust the value for
Start.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
