How To Set the Valve to AUTO Position
Chapter Eight: Operation in Control Mode
252
How To Set the Valve to AUTO Position
This feature operates the valve according to the control parameters in the active recipe. The
control parameters include gain, lead, and set point.
1. Press the [
CONTROL MODE
] key.
The system responds by entering Control Mode.
2. Scroll to the
AUTO
legend with the arrow keys.
The system responds by scrolling the small arrow in the window display.
3. Press the [
ENTER
] key.
The system responds by operating the valve according to the control parameters of the
active recipe.
How To Set the Valve to CLOSE Position
This command sequence adjusts the valve control signal output to 0. Generally, this means the
valve goes to a fully closed position.
1. Press the [
CONTROL MODE
] key.
The system responds by entering Control Mode.
2. Scroll to the
CLOSE
legend with the arrow keys.
The system responds by scrolling the small arrow in the window display.
3. Press the [
ENTER
] key.
The system responds by setting the valve control signal output to 0. As a result, the
valve’s position generally goes to full close.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
