System Design Elements
Chapter Three: Overview
96
Data Stored in EEPROM During Power Loss (Continued)
Ion Gauge Auto-Power -Off Feature
Analog Output Data (for all 3 outputs)
Auto-off trip point value
Auto-off status (enabled or disabled)
Reference channel number
Analog output type
Channel number
Endpoint
Configuration Data
Analog Set Point Data
Sensor board type (each channel)
Leakage rate time base
Analog set point zero voltage
Analog set point full scale voltage
Channel number
Analog set point full scale pressure
Communications Data
Dual Channel Data for Displays
Data logger interval
Baud rate
Communications mode (parity, data bits, stop
bits)
Protocol (MKS 146 or data logger)
Upper threshold
Lower threshold
Continuity type
Associated channels in dual 1 and dual 2
General Settings
Audio alarm state (enabled or disabled)
Measurement units
Auto zero state (enabled or disabled)
Auto zero reference
Auto power state (enabled or disabled)
Auto power trip point
Channel range
Channel sensitivity
Span settings
Span enable
Display settings
Table 37: Data Stored in EEPROM During a Power Loss
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com