5-81
Maintenance and inspection procedures
5Maintenance and Inspection
5.3.2 Installing/removing the cover
Fig.5-4 ： Installing/removing the cover
Check to see that the packing has not been torn or peeled off when the cover
was mounted/removed. If it has been torn or peeled off, please contact dealer. If
the cover is used with the packing torn or peeled off, oil mist and other
substances may enter inside the arm and cause a malfunction.
<4> ADD cover
(lower side of back of base)
<3> No.2 arm cover B
(Back of No.2 arm cover)
<5> Battery cover
<6> CONBOX cover
(upper side of back of base)
*The type in the diagram is the RH-3FH, however the cover
is the same on the RH-6FH/12FH/20FH.
<1>
No.2 arm cover U
<2>
No.2 arm cover D
Note) The cover
on the top
face of the
No.1 arm is
not removing.
CAUTION
