MitraStar DSL-100HNU-T1 v3 User Manual Download Page 92

Page: 92 / 235

Chapter 7 Home Networking

The following figure is an overview of the Device’s file server feature. Computers

and

can access

files on a USB device (

) which is connected to the Device.

Figure 49

File Sharing Overview



The Device will not be able to join the workgroup if your local area network has restrictions

set up that do not allow devices to join a workgroup. In this case, contact your network

administrator.

7.7.1 Before You Begin

Make sure the Device is connected to your network and turned on.

Connect the USB device to one of the Device’s USB ports. Make sure the Device is connected to your

network.

The Device detects the USB device and makes its contents available for browsing. If you are

connecting a USB hard drive that comes with an external power supply, make sure it is connected to

an appropriate power source that is on.



If your USB device cannot be detected by the Device, see the troubleshooting for

suggestions.

Summary of Contents for DSL-100HNU-T1 v3












































































































































































































































Search results

Summary of Contents for DSL-100HNU-T1 v3

Reviews:

Related manuals for DSL-100HNU-T1 v3

Brands by name

Popular brands

MitraStar DSL-100HNU-T1 v3, User Manual

Search results

Summary of Contents for DSL-100HNU-T1 v3

Reviews:

Related manuals for DSL-100HNU-T1 v3

Brands by name

Popular brands