Chapter 1 Introduction
13
None of the LEDs are on if the Device is not receiving power.
Table 1
LED Descriptions
LED
COLOR
STATUS
DESCRIPTION
POWER
Green
On
The Device is receiving power and ready for use.
Blinking
The Device is self-testing.
Red
On
The Device has hardware failure.
Blinking
Firmware upgrade is in progress.
Off
The Device is not receiving power.
ETHERNET
1-4
Green
On
The Device has a successful 100 Mbps Ethernet connection with a
device on the Local Area Network (LAN).
Blinking
The Device is sending or receiving data to/from the LAN at 100 Mbps.
Off
The Device does not have an Ethernet connection with the LAN.
WLAN/
WPS
Green
On
The wireless network is activated.
Blinking
The Device is communicating with other wireless clients.
Orange
Blinking
The Device is setting up a WPS connection.
Off
The wireless network is not activated.
DSL
Green
On
The DSL line is up.
Blinking
The DSL line is initializing.
Off
The DSL line is down.
INTERNET
Green
On
The Device has an IP connection but no traffic.
Your device has a WAN IP address (either static or assigned by a DHCP
server), PPP negotiation was successfully completed (if used) and the
DSL connection is up.
Blinking
The Device is sending or receiving IP traffic.
Off
The Device does not have an IP connection.
Red
On
The Device attempted to make an IP connection but failed.
USB
Green
On
The Device recognizes a USB connection through the USB slot.
Blinking
The Device is sending or receiving data to or from the connected USB
device.
Off
The Device does not detect a USB connection through the USB slot.
Refer to the Quick Start Guide for information on hardware connections.
