MitraStar DSL-100HNU-T1 v3 User Manual Download Page 228

Page: 228 / 235

Appendix A Legal Information

228

List of national codes

COUNTRY

ISO 3166 2 LETTER CODE

COUNTRY

ISO 3166 2 LETTER CODE

Austria

Malta

Belgium

Netherlands

Cyprus

Poland

Czech Republic

Portugal

Denmark

Slovakia

Estonia

Slovenia

Finland

Spain

France

Sweden

Germany

United Kingdom

Greece

Iceland

Hungary

Liechtenstein

Ireland

Norway

Italy

Switzerland

Latvia

Bulgaria

Lithuania

Romania

Luxembourg

Turkey

Safety Warnings

• Do NOT use this product near water, for example, in a wet basement or near a swimming pool.

• Do NOT expose your device to dampness, dust or corrosive liquids.

• Do NOT store things on the device.

• Do NOT install, use, or service this device during a thunderstorm. There is a remote risk of electric shock from lightning.

• Connect ONLY suitable accessories to the device.

• Do NOT open the device or unit. Opening or removing covers can expose you to dangerous high voltage points or other risks. ONLY

qualified service personnel should service or disassemble this device. Please contact your vendor for further information.

• ONLY qualified service personnel should service or disassemble this device.

• Make sure to connect the cables to the correct ports.

• Place connecting cables carefully so that no one will step on them or stumble over them.

• Always disconnect all cables from this device before servicing or disassembling.

• Use ONLY an appropriate power adaptor or cord for your device. Connect it to the right supply voltage (for example, 110V AC in North

America or 230V AC in Europe).

• Use ONLY power wires of the appropriate wire gauge (see for details) for your device. Connect it to a power supply of the correct voltage

(see for details). .

• Do NOT remove the plug and connect it to a power outlet by itself; always attach the plug to the power adaptor first before connecting it to

a power outlet.

• Do NOT allow anything to rest on the power adaptor or cord and do NOT place the product where anyone can walk on the power adaptor

or cord.

• Do NOT use the device if the power adaptor or cord is damaged as it might cause electrocution.

• If the power adaptor or cord is damaged, remove it from the device and the power source.

• Do NOT attempt to repair the power adaptor or cord. Contact your local vendor to order a new one.

• Do not use the device outside, and make sure all the connections are indoors. There is a remote risk of electric shock from lightning.

• Do NOT obstruct the device ventilation slots, as insufficient airflow may harm your device.

• Use only No. 26 AWG (American Wire Gauge) or larger telecommunication line cord.

• Antenna Warning! This device meets ETSI and FCC certification requirements when using the included antenna(s). Only use the included

antenna(s).

• If you wall mount your device, make sure that no electrical lines, gas or water pipes will be damaged.

• Warning! To avoid risk of electric shock, remove only one card at a time and do not place fingers or objects inside the chassis. Cover empty

slots with slot covers.

• The length of exposed (bare) power wire should not exceed .

Summary of Contents for DSL-100HNU-T1 v3












































































































































































































































Search results

Summary of Contents for DSL-100HNU-T1 v3

Reviews:

Related manuals for DSL-100HNU-T1 v3

Brands by name

Popular brands

MitraStar DSL-100HNU-T1 v3, User Manual

Search results

Summary of Contents for DSL-100HNU-T1 v3

Reviews:

Related manuals for DSL-100HNU-T1 v3

Brands by name

Popular brands