Chapter 6 Wireless
64
Click
Network Setting > Wireless > WPS
. The following screen displays. Select
Enable
and click
Apply
to activate the WPS function. Then you can configure the WPS settings in this screen.
Figure 35
Network Setting > Wireless > WPS
The following table describes the labels in this screen.
Table 17
Network Setting > Wireless > WPS
LABEL
DESCRIPTION
Enable WPS
Select
Enable
and click
Apply
to activate WPS on the Device.
Add a new device with WPS Method - These fields display after you enable WPS and click
Apply
.
Method 1 PBC
Use this section to set up a WPS wireless network using Push Button Configuration
(PBC).
WPS
Click this button to add another WPS-enabled wireless device (within wireless range of
the Device) to your wireless network. This button may either be a physical button on
the outside of device, or a menu button similar to the
WPS button
on this screen.
Note: You must press the other wireless device’s WPS button within two minutes of
pressing this button.