Chapter 1 Introduction
11
1.5 Wireless
Access
The Device serves as a wireless Access Point (AP) to let wireless clients such as notebook computers,
smart phones, and tablets connect to the Internet without Ethernet cables.
Configure your wireless network through the Web Configurator, or the WPS button.
Figure 2
Wireless Access Example
1.5.1 Using the WLAN/WPS Button
By default, the Device’s wireless network is enabled. To turn it off, simply press the
WPS/WLAN
button on top of the Device for over 5 seconds. The
WLAN/WPS
LED turns off.
Use the
WLAN/WPS
button to quickly set up a secure wireless connection between the Device and a
WPS-compatible client by adding one device at a time. To activate WPS:
1
With the
POWER
LED on steady, press the
WLAN/WPS
button for 1 second and release it.
