Chapter 6 Wireless
53
Click
Network Setting > Wireless
to open the
General
screen. Select the
Enable Wireless LAN
checkbox to show the Wireless configurations.
Figure 26
Network Setting > Wireless > General
The following table describes the labels in this screen.
Table 9
Network > Wireless LAN > General
LABEL
DESCRIPTION
Wireless Network Setup
Wireless
Select the
Enable Wireless LAN
check box to activate the wireless LAN.
Note: You must also set the Device’s physical
WLAN ON/OFF
button to
ON
to use
wireless LAN. The
WLAN
LED should be on.
Wireless Network Settings
Wireless Network
Name (SSID)
The SSID (Service Set IDentity) identifies the service set with which a wireless device is
associated. Wireless devices associating to the access point (AP) must have the same
SSID.
Enter a descriptive name (up to 32 English keyboard characters) for the wireless LAN.
Hide SSID
Select this check box to hide the SSID in the outgoing beacon frame so a station
cannot obtain the SSID through scanning using a site survey tool.
Client Isolation
Select this to keep the wireless clients in this SSID from communicating with each
other directly through the Device.
