ACM700x-‐2-‐LMx Quick Start (520084-‐Rev 1.1)
Page 1
ACM7004-‐2-‐LMA
ACM7004-‐2-‐LMCR
ACM7008-‐2-‐LMA
ACM7004-‐2-‐LMV
ACM7004-‐2-‐LMCT
ACM7008-‐2-‐LMV
ACM7008-‐2-‐LMR
Quick Start Guide
Thank you for purchasing the Opengear Resilience Gateway (referred to herein as the
appliance
). This Quick Start walks you through installation, configuration & local
operation. More details are available in the
User Manual
, which can be downloaded from:
http://opengear.com/documentation
Step 1 Check kit contents
Resilience Gateway appliance; e
xternal rack m
ount tab;
black
terminal block; t
wo 4G LTE blade antennas; dual
SIM holder; DB9F-RJ45 adapter (319015, to DTE); four
rubber feet; 12VDC power pack; Quick Start Guide.
Step 2 Connect the hardware
Ø
Attach rubber feet to base, or attach the rack mount tab
Ø
Screw the antennas on to the
(M)
main and
(A)
diversity connectors – if
you have an optional GPS antenna, screw it on to the GPS connector
Ø
Using a standard size Mini-SIM (2FF) card,
insert the
notched side firmly
into the bottom slot of the SIM holder, with contacts facing upwards
Ø
Insert the holder into the Dual SIM slot, with
longer guide arm to the left
Note:
The -LMA, -LMV, -LMCR and -LMCT models include Opengear
OCM
cellular
modem devices, which are programmable to support either AT&T USA, Verizon USA,
Rogers Canada or Telus Canada. The -LMR with
OCM73R4
supports most other carriers
globally, including major carriers in EMEA, APAC and ANZ regions. For more details, refer
to the
Knowledge Base FAQ
article
OCM modem devices integrated in ACM7000
Resilience Gateways
.
Ø
Connect the Ethernet
NET1
port to your primary network