Mindray BC-2800, Operator'S Manual

Page: 85 / 286

Customizing the Analyzer Software
5-23
Figure 5-37 A message box to remind you of the erroneous entry
6. If you want to resume the default settings, press [F4].
„ Exiting the “
Ref. Range
” group
When you have finished changing all the parameter units and count time settings you want to
change, you may
1. Press [F1] to select another setting group you want to change; or;
2. Press [MENU] to exit to the system menu.
5.3.7 Auto Maintain
You can select “
Auto Maintain
” group to view or set the how many WB samples can be run
after perform auto maintaining.
„ Selecting “
Auto Maintain
” group
Press [F1] to select the “
Auto Maintain
” group.
Figure 5-38 “Auto Maintain” screen(1)
The screen displays:
1) how many WB samples had been run after auto-cleaning and how many WB
samples can be run between two auto-cleanings;
2) how many WB samples had been run and how long the analyzer run after soak by
probe cleanser