Mindray BC-2800, Operator'S Manual

Page: 105 / 286

Operating Your Analyzer
6-13
Figure 6-8 Select department name
„ Entering the names of the sender, tester and checker
To enter the name of the person who sent the sample for analysis, enter the name into the
“
Sender
” box or
SELECT
the desired name
from
the
“Sender” pull-down list
(if there are
previously saved names in the list ) ; to enter the name of the person who is to run (or has run)
the sample, enter the name into the “
Tester
” box or
SELECT
the desired name
from
the
“Tester” pull-down list
(if there are previously saved names in the list
)
; to enter the name of
the person who is to review the sample results, enter the name into the “
Reviewer
” box, or
SELECT
the desired nam
e from
the
“Checker” pull-down list
(if there are previously saved
names in the list ) . All the three pull-down lists are capable of saving 30 entered names.
„ Exit edit
When you have finished entering all the desired sample information,
CLICK
the “
Yes
” button
to save the changes and return to the “
Count
” screen. If you do not want to save the entered
information,
CLICK
the “
No
” button to return to the ”
Count
” screen without saving the
changes.
Batch Edit Mode (external keyboard needed)
If your analyzer is configured as
Batch edit
, you can continuously enter information of a
batch of samples. Follow the steps given below to do so.
„ Entering Edit
At the “
Count
” screen, press [F4] and an edit window will pop up, as Figure 6-9 shows.
Follow the instructions to enter the information of the first sample.