Mindray BC-2800, Operator'S Manual

Page: 84 / 286

Customizing the Analyzer Software
5-22
„
Setting reference ranges (administrators only)
1. Enter the administrator password as introduced in
Chapter 5.2.1
;
2. At the “
Settings
” screen, press [F1] to select the “
Ref. Range
” group, as Figure 5-35
shows;
3. When you have finished selecting the patient group,
SELECT
the desired parameter and
ENTER
the desired digits for the upper and lower limits;
Figure 5-35 Setting reference range
4. Press [F2] to save the changes. If the changes are successfully saved, a message box
shown in Figure 5-36 will pop up;
CLICK
the “
Yes
” to close the message box;
Figure 5-36 A message box to note data saved
5. If some entered limits are invalid, a message box shown in Figure 5-37 will pop up.
CLICK
“
Yes
” and enter valid number again;