MIMAKI CF3-1610 Operation Manual Download Page 143

Page: 143 / 166

Adjusting the Tools

6-9

ou
bleshoo

ting

Press

to start drawing the test pattern.

Check and adjust the test pattern.

• Press

to adjust.

Set values

:- 4500 ~ + 4500

• For details, see “Adjusting the

Angle” at the bottom of the page.

Press

to make further adjustments.

Press

to save the adjusted values and exit.

• To make further adjustments, press

to display the adjustment screen.

Offset Adjustment

: Operations from Step 4 on

P.6-4.

Adjust Eccentricity

: Operations from Step 4 on

P.6-6.

• Press

to exit without saving the adjusted values.

Adjusting the

Angle

The

angle can be adjusted on the screen below.

(1)

Check the displacement between the patterns drawn with the pen and cutter (roller).

(2)

Make the adjustment.

Rotated clockwise

Rotated counterclockwise

< AD J >

2 / 3

CUT T ER

+ 0 0 0 0 >

PA T T ERN N o .

1 >

T ES T PA T TERN

- >

Press or to adjust.

Press to decrease the CUTTER

value.

Press to increase the CUTTER

value.

Summary of Contents for CF3-1610







































































































































































Search results

Summary of Contents for CF3-1610

Reviews:

Related manuals for CF3-1610

Brands by name

Popular brands

MIMAKI CF3-1610, Operation Manual

Search results

Summary of Contents for CF3-1610

Reviews:

Related manuals for CF3-1610

Brands by name

Popular brands