MIMAKI CF3-1610, Operation Manual

Page: 52 / 166

1-38
Setting the Command Origin
This setting aligns the unit command origin position with the command origin position in the CAD system used.
For more information on the command origin position handled by the CAD system, see the CAD Instruction
Manual.
1
Display the third page of the local menu.
• Press several times.
2
Press and select
[MODE SET].
3
Display the fourth page of the MODE SET
menu.
• Press several times.
4
Press and select the [ORIGIN] set value.
• Set values: LOWRIGHT , CENTER
5
Press .
• The settings are saved.
• Press
if you do not want to save the settings.
Item Set value
LOWRIGHT Lower-right of the maximum effective cutting area.
CENTER Center of the maximum effective cutting area.
[ LOCA L ] 3 / 5
I NT ERF ACE - - - >
MODE SE T - - - >
SE L F T EST - - - >
<MODE SET > 1 / 7
Z S TROKE 7mm>
MUL T I - PASS - - - >
VACUUM - - - >
<MODE SET > 4 / 7
OH UN I T I N I T V a l >
OR I G I N LOWR I GHT >
GDP
0 . 0 2 5mm>