MIMAKI CF3-1610, Operation Manual

Page: 99 / 166

3-9
3
Making
the Mo
st of the
Uni
t
Rotating Coordinate Axes (ROTATE)
If the command origin is set at the lower-right point, this setting determines the direction to rotate the coordinate
axes to match the CAD system.
1
Display the third page of the local menu.
• Press several times.
2
Press and select
[MODE SET].
3
Display the third page of the MODE SET
menu.
• Press several times.
4
Press and select the [ROTATE] set
value.
• Set 90°, -90°
5
Press to save the setting.
• Press if you do not want to save the setting.
Set value Description
+ 90 °
Sets the coordinate axes at the lower-right corner of the maximum
effective cutting area.
- 90 °
Sets the coordinate axes at the lower-left corner of the maximum effective
cutting area.
Command origin set at
lower-right corner.
Set rotated by
-90°.
[ LOCA L ] 3 / 5
I NT ERF ACE - - - >
MODE SE T - - - >
SE L F T EST - - - >
<MODE SET > 1 / 7
Z S TROKE 7mm>
MUL T I - PASS - - - >
VACUUM - - - >
<MODE SET > 3 / 7
ROT A TE + 9 0 ° >
COMMAND MGL - I I C 3
CMD SW
E n a b l e >
<MODE SET > 3 / 7
ROT A TE - 9 0 ° >
COMMAND MGL - I I C 3
CMD SW
E n a b l e >