6-29
6
Tr
ou
bleshoo
ting
Specifications
Type
SPECIFICATIONS
CF3-1631
CF3-1610
Effective plotting width
X axis
3100 mm
1000 mm
Y axis
1600 mm
Driving method
X, Y, Z,
θ
DC servo Special timing driving
Maximum speed
50 cm/s
Maximum acceleration
0.5 G
Mechanical resolution
X axis : 0.00234 mm
Y axis : 0.003125 mm
θ
axis : 0.005625
°
Z axis : 0.001875 mm
Command resolution
0.025 mm / 0.010 mm (switchable on operation panel)
Static
accuracy
*1
*1. This is the accuracy for pen writing with almost no load. The guaranteed temperature range is 20 to 25°C.
Repeat accuracy
± 0.15 mm
Range accuracy
± 0.1 mm or ± 0.1% of travel distance, whichever is largest
Origin reproducibility
± 0.15 mm
Perpendicular
accuracy
1.5 mm
Work securing method
Vacuum suction by blower
*2
*2. Up to three blowers for absorption equivalent to 2.2kw can be set (up to two for CF3-1610). The blower is an
option. It is not attached to the main body.
Maximum cut work thickness
M model
: 50 mm
R1 model : 20 mm
TF2 model : 10 mm
Maximum set work thickness
M model
: 50 mm
R1 model : 20 mm
TF2 model : 25 mm
Settable work weight
120 kg max. (No point load)
60 kg max. (No point load)
Receiving buffer capacity
1 MB
Command
MGL-IIc3 (MGL-IIc supported)
*3
*3. This is a dedicated HP-GL command.
Interface
USB / RS-232C
Operating environment
10 - 35 °C 35 - 75 % (Rh), no condensation
External
dimensions
Width
2250 mm or less
Depth
4120 mm or less
1860 mm or less
Height
Approx. 1320 mm
Cutting panel surface
height
Approx. 840 mm
Weigh
Approx. 1050 kg
Approx. 600 kg
Power supply
Single phase AC200 V - 240 V 50 / 60 Hz 6 A or less 1200 VA or less
Service outlet power supply
(for dust collector)
Single phase AC100 V - 120 V (50/60Hz)15 A or less
Single phase AC220 V - 240 V (50Hz)10 A or less
Blower power supply
Single phase AC200 V
*2
- 240 V 50/60Hz for one unit
30A or less, 6000VA or less
Summary of Contents for CF3-1610
