MIMAKI CF3-1610, Operation Manual

Page: 118 / 166

4-8
Setting Register Mark Detection
Precautions Related to Register Mark Detection
Table of Settings
Make the following settings to make cuts using register marks.
• To set the distance between the printed register marks the same as the cut distance, enter the distance
between the printed register marks used for register mark detection. (Scale Correction -> P.5-10)
• When register marks are detected, the origin is set at TP1. When the origin is moved to another position
using the jog keys, the new origin is enabled.
• Rotation is disabled.
• One-stroke cutting is disabled.
• To detect the register mark with FineCut, select
“
LOWRIGHT
”
in the command origin setting.
( P.1-38
)
Set Item Set value Description
DETECT
OFF Set for cutting normal workpieces, not for outline cutting.
1 pt Detects TP1 and sets the origin.
2 pt
Detects TP1 and TP2. Conducts tilt correction and scale correction in
the workpiece direction.
3 pt
Detects TP1, TP2, and TP3. Conducts tilt correction and scale
correction in the workpiece direction and Y-direction.
4 pt
Detects TP1, TP2, TP3, and TP4. Conducts tilt correction and 4-point
scale correction.
SIZE
5 mm - 30 mm
Sets a side length of the register mark edge length.
STYLE
Square,
Single,
Double
Select from three register mark styles:
X COPY
1~99
This is effective for multiple identical patterns equally spaced. The unit
automatically makes the designated number of cuts based on the
original data, while consecutively reading the register marks.
Y COPY
SCALE
OFF
*1
*1. Set to OFF when using FineCut.
No scale correction during register mark detection.
after
Enter the X and Y sizes in the data after register mark detection to
correct the scale.
SCALE is not conducted if DETECT is set to “1pt”.
before
Enter the X and Y sizes in the data before register mark detection to
correct the scale.
SCALE is not conducted if DETECT is set to “1pt”.
Square Single Double
• Set the number of copies here to 1 if the actual
number of copies is set using FineCut or other
software.