MIMAKI CF3-1610, Operation Manual

Page: 100 / 166

3-10
Setting the Cutter Stroke
This setting shortens the distance that the tool rises when cutting (or drawing) data with frequent up/down
movements of the tangential cutter or grid roller and milling.
It thereby reduces the total cutting time.
1
Display the third page of the local menu.
• Press several times.
2
Press and select
[MODE SET].
3
Press and select the [Z STROKE]
set value.
• Set values: 7 mm, 4 mm
• When milling, the setting values will be 8 mm and 3
mm.
4
Press to save the setting.
• Press if you do not want to save the setting.
Set value Description
7mm (8mm)
*1
*1. Setting value when milling
Tool rises 7 mm (8mm
*1
) above the workpiece surface.
4mm (3mm)
*1
Tool rises 4 mm (3mm
*1
) above the workpiece surface.
[ LOCA L ] 3 / 5
I NT ERF ACE - - - >
MODE SE T - - - >
SE L F T EST - - - >
<MODE SET > 1 / 7
Z S TROKE 7mm>
MUL T I - PASS - - - >
VACUUM - - - >
<MODE SET > 1 / 7
Z S TROKE 4mm>
MUL T I - PASS - - - >
VACUUM - - - >