Setting the Cutting Conditions
2-17
2
Bas
ic Operations
Outline
Speed for cutting an arc with a radius less than 5 mm.
If OFF, the previously set speed is used for cutting.
Speed for cutting an arc with a radius at least 5 mm but less than 10 mm.
If OFF, the previously set speed is used for cutting.
Speed for cutting an arc with a radius at least 10 mm but less than 15 mm.
If OFF, the previously set speed is used for cutting.
Speed for drawing an arc with a radius at least 15 mm but less than 20 mm.
If OFF, the previously set speed is used for drawing.
Speed for drawing an arc with a radius at least 25 mm but less than 30 mm.
If OFF, the previously set speed is used for drawing.
Speed for drawing an arc with a radius at least 30 mm but less than 40 mm.
If OFF, the previously set speed is used for drawing.
Speed for drawing an arc with a radius at least 40 mm but less than 50 mm.
If OFF, the previously set speed is used for drawing.
Speed for drawing an arc with a radius at least 50 mm but less than 100 mm.
If OFF, the previously set speed is used for drawing.
Descent speed for the milling tool.
Rotation speed (rpm) of the milling tool.
Designates the thickness of the mounted workpiece.
The Z origin coordinates set on P.2-9 is displayed.(The origin coordinates cannot be set here.)
Thickness
( mm )
Cutting Direction *
Speed
( cm/s )
ACCELE
(G)
Round Speed
(x1000rpm)
Depth
( mm )
Z SPEED
( mm/s )
End Mill Diameter
*
( mm )
3
Up-Cut
3
0.3
40
3
10
3
5
Up-Cut
2.5
0.3
25
5
10
4
3
Up-Cut
1
0.3
30
3
10
3
17
Up-Cut
1
0.3
30
9
10
4
17
Up-Cut
1
0.3
30
17
10
4
32
Up-Cut
1
0.3
30
11
10
6
32
Up-Cut
1
0.3
30
22
10
6
32
Up-Cut
1
0.3
30
32
10
6
53
Up-Cut
1
0.3
30
10
10
6
53
Up-Cut
1
0.3
30
21
10
6
53
Up-Cut
1
0.3
30
32
10
6
53
Up-Cut
1
0.3
30
43
10
6
53
Up-Cut
1
0.3
30
53
10
6
Summary of Contents for CF3-1610
