MIMAKI CF3-1610, Operation Manual

Page: 95 / 166

3-5
3
Making
the Mo
st of the
Uni
t
Setting Multi-pass Cutting
Setting Multi-pass Cutting (Models R1, TF2)
The same data can be cut up to five times, while changing the press value.
This is an effective means of cutting a workpiece that cannot be cut in one pass.
1
Display the third page of the local menu.
• Press several times.
2
Press and select
[MODE SET].
3
Press and select
[MULTI-PASS].
4
Press and select
[CUT START].
• Set value: OFF, 5, 15, 30, 45, 60 (s)
5
Select the PRESS 1 or PRESS 2 press value.
• Set value: 300 g to 5000 g
: Sets the first press value
: Sets the second press value
• Multi-pass cutting is not possible for Unit B of Model R1.
• Set the cut start time that sets the delimiter between data. Multi-pass cutting starts if the next data is not
received within the set time.
Set Item Set value Description
CUT START OFF, 5, 15, 30, 45, 60 (s)
Set the cut start time that sets the delimiter between data. Multi-
pass cutting starts if the next data is not received within the set
time.
PRESS 1st
OFF, 300 g to 5000 g
*1
(50 g steps)
*1. The set values differ according to the unit.
Unit B : 300 g to 1500 g
Unit C : 1000 g to 5000 g (except grid roller)
Sets the press value for the first cut.
PRESS 2nd Sets the press value for the second cut.
PRESS 3rd Sets the press value for the third cut.
PRESS 4th Sets the press value for the fourth cut.
PRESS 5th Sets the press value for the fifth cut.
• Multi-pass cutting is disabled if PRESS 1ST to PRESS 5TH are all set to OFF.
[ LOCA L ] 3 / 5
I NT ERF ACE - - - >
MODE SE T - - - >
SE L F T EST - - - >
<MODE SET > 1 / 7
Z S TROKE 7mm>
MUL T I - PASS - - - >
VACUUM - - - >
<MU L T I - PASS > 1 / 2
CUT ST ART OF F >
PRESS . 1 s t OF F >
PRESS . 2 n d OF F >
<MU L T I - PASS > 1 / 2
CUT ST ART 1 5 s >
PRESS . 1 s t OF F >
PRESS . 2 n d OF F >
<MU L T I - PASS > 1 / 2
CUT ST ART 1 5 s >
PRESS . 1 s t 5 0 0 g >
PRESS . 2 n d 5 0 0 g >