MIMAKI CF3-1610, Operation Manual

Page: 138 / 166

6-4
Adjusting the Offsets
Conduct positioning to correct for displacements by comparing a
test pattern drawn by the pen with a test pattern drawn by the
cutter or roller.
1
Display the fifth page of the local menu.
• Press several times.
2
Press and select
TOOL ADJUST.
• If Head C is the cutter, the third line displays
[C CUTTER ADJUST].
3
Press or .
• : Selects Head B
: Selects Head C
4
Press several times to display
the third page of the menu.
• The Adjust Offset Screen is displayed.
• If a Head containing a roller was selected at Step 3, [ROLLER X][ROLLER Y] are displayed in the
second and third lines.
5
Press the jog keys to move the head to the drawing position.
6
Press to start drawing the test pattern.
7
Check and adjust the test pattern.
• Press or to make the adjustments.
CUTTER X(ROLLER X) : 33.0 ~ 41.0 (33.0 ~ 41.0)
CUTTER Y(ROLLERY) : 41.0 ~ 49.0 (86.0 ~ 94.0)
• For details, see P.6-5 “Adjusting the Offsets”.
• First, mount a pen in Unit A.
30mm
30m
m
Normal
test pattern
[ LOCA L ] 5 / 5
RESERVE - - - >
RESERVE - - - >
TOOL AD J US T - - - >
< TOOL AD J UST > 1 / 2
B CUT T ER AD J UST >
C ROL L ER AD J UST >
C I RC L E
θ
COR >
< AD J > CENT ER 1 / 3
A ( L ENG ) + 0 0 . 0 0 >
B + 0 0 . 0 0 >
T ES T PA T T ERN - >
< AD J > CENT ER 3 / 3
CUT T ER X + 3 6 . 4 0 >
CUT T ER Y + 4 5 . 4 0 >
T ES T PA T T ERN - >