MIMAKI CF2 Series, Operation Manual

Page: 62 / 186

— 2.14 —
Cutter holder 2N (for unit B)
Cutter holder 2N is a tangential cutter used for the unit B.
The unit B (reciprocal head) is used for non-reciprocal operation. (For the cutting conditions, refer
to page 2-28.) Works of up to 2 mm thick can be cut.
• The carbide blades (SPB-0045, 0046) and high-speed steel blades (SPB-0043,
0044) are the tools that can be used.
• When using a cutter holder 2N, be sure to set the “VIBRATION” of cut condi-
tion to “OFF”.
If “VIBRATION” is set to 1 to 5, cutter holder or this machine may be dam-
aged.
The adjustment method is the same as that described above for cutter holders 4N and 10N. Please
refer to that section.