MIMAKI CF2 Series, Operation Manual

Page: 156 / 186

— 5.18 —
INITIALIZE THE REGISTER MARK SCALE ADJUSTMENT [SC.CLR]
When using a cutting software other than “FineCut,” need to initialize the adjustment value after
cutting. [SC.CLR] initialize the shaft adjustment value and scale adjustment value.
If cut the data where no register mark positioned without initialize the adjustment value, cut may
misaligned.
1
If it is in the REMOTE mode, press
REMOTE
LOCAL
key to enter the ROCAL mode.
While processing, it will be interrupted.
2
Display the ROCAL menu page 2.
Press
PAGE
+
key several time.
3
Select [DATA CLEAR].
press
F1
+
key.
4
Execute [ORGkey to SC.CLR]
To cancel the [SCALE CLEAR], press
the
C E
key, it return to the step2,
[ LOCAL ] 1/ 4
TOOL SELECT ———>
CONDITION ———>
TEST CUT ———>
R E M O T E
L O C A L
[ LOCAL ] 2/ 4
DATA CLEAR ———>
COPY ———>
VIEW ———>
PAGE
+
[ LOCAL ] 2/ 4
DATA CLEAR ———>
COPY ———>
VIEW ———>
F1
+
<DATA CKEAR> 1 / 1
END KEY to START
CE KEY to CANCEL
ORGkey to SC.CLR
[ LOCAL ] 2/ 4
DATA CLEAR ———>
COPY ———>
VIEW ———>
ORIGIN