MIMAKI CF2 Series, Operation Manual

Page: 155 / 186

— 5.17 —
CONTINUOUS CUT WITH REGISTER MARK
When using a cutting software “FineCut,”, countinuous cut is available. Register mark on a printed
data should be only one set.
1
Configure the FineCut setting, and
start plot.
Select [Single mode] and set the number
of Repeat.
For more setting detail, refer to the
FineCut operation manual.
2
When cutting of first page finished,
change the work and press
VACUUM
.
If press the
C E
, continuous cut stops.
3
Detect the register mark.( see page
5.12.)
Once register mark detect is done, copy
is started. Repeat Step2 and 3 until the
specified repeat number.
4
When cut is completed, head return
to the home position automatically,
and return to [Local mode]
[ REMOTE]
Exchange SHEET
VAC : Resume
CE : Abort
[ REMOTE]
Set LED Pointer
SPEED
AUTO>
Head Move to LL ->
[ REMOTE]
∗ Auto Copy Mode ∗
2/3
0
[ LOCAL ] 1/ 4
TOOL SELECT ———>
CONDITION ———>
TEST CUT ———>