MIMAKI CF2 Series, Operation Manual

Page: 153 / 186

— 5.15 —
How to detect Register mark
1
Set the work to the plotter.
2
Press
END
key on the [Local] mode.
Display changes to [DETECT] mark
mode
3
Move and align the light pointer on the
center of the TP1 vertical line precisely
with jog key. In the case of square
mark, move to around the center.
•
If [SPEED] is set to AUTO,
speed automatically changes
while pressing the jog key.
•
Press the
F3
+
key enables
t o m o v e t h e h e a d t o L L
(Lower-Left).
4
Press
E N D
key.
Start detecting a register mark.
•
When register mark detection
failed, error is displayed. Re-
set the work to the plotter.
•
If [SCALE] is set to “BE-
FORE”, LCD of Step5 is dis-
played before register mark de-
tection.
[ LOCAL ] 1/ 4
TOOL SELECT ———>
CONDITION ———>
TEST CUT ———>
<DETECT SET>
Set LED Pointer
SPEED
AUTO>
LOWER LEFT ->
END
Around Center
TP1
<DETECT SET>
Set LED Pointer
SPEED
AUTO>
LOWER LEFT ->
END
LED detect point
Single
Double