MIMAKI CF2 Series, Operation Manual

Page: 28 / 186

— 1.12 —
CONNECTING THE CABLES
• Be sure to turn off the the power to the device in prior when connecting the
signal wire cable for the blower, interface cable. If not, there will be a fear of
the arising of electric shock hazards and damage to the device.
Connecting the signal wire cable for the blower
• Do not block the exhaust port of the blower unit (option). Blocking it can drop
the suction force or give rise to a failure.
The signal wire cable for the blower connect the electrical box located below the cutting panel
surface to the blower unit.
1
Insert one end of the signal wire cable
for the blower into the connector of the
electrical box.
Fix the connector with screws.
2
Insert the other end of the signal wire
cable for the blower into the connec-
tor on the blower unit (option).
Fix the connector with screws.
Screws
Screws
WARNING