MIMAKI CF2 Series, Operation Manual

Page: 90 / 186

— 2.42 —
Sample I
The point at which the cutter finishes cutting goes beyond (or does not reach) the predetermined
end position, and the tangential cutter shifts to the right (or left) from the correct position.
Corrective measure
Refer to the corrective measures for the
samples D and E.
Sample J
The cutter rotates clockwise (or counterclockwise), the point at which the cutter finishes cutting
goes beyond (or does not reach) the predetermined end position, and the tangential cutter shifts to
the right (or left) from the correct position.
Corrective measure
Refer to the corrective measures for the
samples B, D and E.