MIMAKI CF2 Series, Operation Manual

Page: 121 / 186

— 4.1 —
CHAPTER 4
APPLICATION FUNCTIONS
This chapter describes helpful functions that facilitate operation.
Table of Contents
Assignment of pen numbers [MODE SET] > [PEN ASIGN] ................ 4.2
Setting the number cut function [MODE SET] > [MULTI-PASS] ....... 4.6
Setting the ONE-stroke cutting [MODE SET] > [ONE STROKE] ...... 4.8
Setting the direction of rotation for the coordinate axis [MODE SET]
> [ROTATE] ................................................................................................... 4.9
Setting the cutter stroke [MODE SET] > [Z STROKE] .................... 4.10
Setting the unit to be used for indication [MODE SET] > [UNIT] . 4.11
Setting the DUMMY CUT operation of the SWIVEL BLADE [MODE
SET] > [DUMMY CUT] ............................................................................. 4.12
Alignment of mechanical axes to ruled lines printed [AXIS ALIGN].... 4.14
Expand the cutting area [EXPANDS] ....................................................... 4.16