MIMAKI CF2 Series, Operation Manual

Page: 141 / 186

— 5.3 —
PRECAUTIONS IN PREPARING DATA WITH REGISTER MARK
There are some limitations on preparing data with register marks. In order to make full use of this
function, read the following instruction carefully and prepare data with register mark.
•
The register mark described here is intended to detect the sheet inclination
and the lengths along the X and Y axes. It is not a mark for trimming.
Size of the square mark
Each side of square mark must be in the range of 5 to 30mm (5mm increments).
Refer to [The size of, and the distance between, square marks] (see page 5.9.) for the relationship
between the data and the length of one sided of a square mark.
5
〜
30mm